Kayak Building Materials
Not sure of exactly what you need?
Brass Stem Bands for Kayaks (Pair)
KayakCraft does NOT call for brass stem bands. We had a number of customers report that repeated beach or rocky shelf landings had worn through the epoxy and cloth just...
The PolyPlank foam bulkheads serve in two capacities. Assume for the moment that your kayak project will have two storage areas accessed through two hatch covers. The 2" wide bulkheads...
CNC Kayak Molds
CNC technology makes for accurate cutting of the all-important station molds. A powerful vacuum holds the 4' x 8' sheet of 5/8" thick particle board firmly in place while the...
Deck Bungee Cord Kit for Kayaks
The deck bungee kit allows the paddler to carry some of his/her kit on the outside of the craft. This is suited for bulky but LIGHTWEIGHT items. As well, one...
Foot Braces for Kayaks
The kit includes pedals, hardwood backing blocks, rails, sliders. For those builders who will not be adding a rudder, this kit will be attached to the hull in a slightly...
Geometric Pattern Kit
These designs were inspired by the art work of America's southwest Navajo people; the patterns just seemed to fit with our various watercraft. The kit consists of 32 pieces all with...
We have experimented with several rudder systems and find the Feathercraft kit to be the most durable and user friendly. The kit includes all cables, mounting brackets. sleeves and fittings. It...
Kayak Seat (Our Favourite!)
Nimbus Creature Comfort Kayak Seat The Nimbus Creature Comfort Seat is a good choice for comfort and simplicity. Constructed of closed cell foam, it is nylon covered. The back-rest is...
Kayak Strips: Bead and Cove (Clear, Full Length)
All the strips measure 1/4" x 13/16" ; all are clear Western Red Cedar, vertical grain, full length and milled so that the 8 strips from any one board are...
Keyhole Cockpit Coaming Kit
The CNC cut Cockpit COAMING kit consists of 8 pieces of 5 mm Okoume marine grade plywood; this product is generally quite light in colour. (see images). The three base...
King Board for Kayak
The KING BOARD is a feature of kayak decks; it straddles the midline. Typically, it is installed AFTER the first two rows of bead and cove planking have been attached...
Oval BOW (Forward) Hatch Kit for Kayak
These items are CNC cut and are produced from sheets of 4mm Okoume marine grade plywood. The two ovals are identical. If you are following KayakCraft, it quickly becomes obvious...
Oval STERN (Aft) Hatch Kit for Kayak
These items are CNC cut and are produced from sheets of 4mm Okoume marine grade plywood. The oval pairs are identical-one attaches UNDER the deck - the second attached to...
Sheer Clamps for Kayak
The sheer clamps are of red cedar and measure 3/4" x 7/8" x length for your project. The sheer clamps reside in a matching notch cut into the station molds...
Sheer Guards for Kayak
The white ash sheer guards measure 3/8" thick x 1" tall x length for your kayak project. The guards cover over the seam created when the deck has been epoxy...
Stem Stock for a Kayak
The kit contains 12 pieces planed two faces, air dried for best steam bending characteristics; the four INNERS are 1/4" x 1" x 40" and the two outers are 1/4"...
Swell Nut Locking Levers for Kayak Hatches
The swell nut (expanding rubber sleeve does the swelling) levers are a simple way to secure the kayak hatches when under way. They work in conjunction with the CNC oval...